How to Protect Your Families From the Radioactive WiFi Routers

Currently, there are different ways to build a home network. And almost most families would connect an extra WiFi router even if they already have a wired internet so that they can use their mobile devices anywhere in the house. To do this, you need to not only properly install and configure the WiFi router, but also pay attention to the radiation that the device may cause. As we all known, the radiation always does harm to the central nervous system of the human brain. So, what should you do to minimize the harmful radiation and protect your families’ health?

How Harmful the Radiation from WiFi Routers Is

As already mentioned above, radiation from the WiFi router does have some irritant effect on the central nervous system of the human brain. It is manifested in fatigue, irritability, headaches and insomnia, which arise as a result of oversized electromagnetic background. The radiation frequency is at 2.4 GHz, which approximately equals to the frequency of the microwave oven, but still a few thousand times less.

4 Tips for Minimize the Radiation and Protect Your Families’ Health

Firstly, if the Internet is not used when you are at home, the WiFi router should be disconnected to the power supply. Sleeping next to the activated access point is not recommended, let alone working at a very close distance from it.

Secondly, if WiFi is on the phone, it should either be included as appropriate or not to keep constantly beside it. Especially, you and your families had better not sleep with the included source signal by placing the phone on the next pillow. As for the fixed WiFi router, it is desirable to be placed in the middle of the apartment. You should try to choose a place which is the most distant from the places your families most often stay at.

Thirdly, you can adjust the transmission power of the routers. it is not necessary to put on the most powerful level to get the best signal. An average signal level would be enough for your routine use.

Finally, you can use a box to insulate the radiation from the WiFi router. The anti-radiation WiFi modem antenna boxes can absorb the electromagnetic radiation and then convert it into heat energy consume, which would not cause the second pollution. They reduce the radiation by up to 94.4%, and would not affect the signal negatively.

5 Things to Understand About VPN Speed

The speed of a VPN is an important thing to consider, and may also be a determining factor for many people when deciding whether they should use a VPN at all. Speed really does matter when it comes to the Internet. Even if a VPN provides improved online security and can help get around blocked content, if the service is slow, the overall experience will be far from ideal.

In this article, I will look at several factors that can influence the speed of a VPN, and how they can be mitigated.

1) The VPN Server Location

Typically, establishing a connection with a VPN server closer to your location will result in better speed. This is because the complexity of Internet traffic goes up as the distance between you and the VPN server increases. The more complex the traffic, and the greater the distance data has to travel, the slower the VPN speed.

If you don’t have a good reason for connecting to a particular VPN location, picking the one closest to you is the best option. For example, if you live in Texas and want to log into a US VPN server, use one in Houston or Dallas instead of one in New York. Similarly, if you’re located in China and need a US VPN server, find one that is available on the West Coast over one somewhere in the east.

2) The VPN Protocols

Different protocols can be used to establish a VPN connection. Some of the more popular ones include OpenVPN (over UDP or TCP), SSTP, PPTP and L2TP/IPSec. Everything else being equal, each protocol can result in a significantly different VPN speed. For example, using OpenVPN over UDP typically results in a faster connection than OpenVPN over TCP.

There are no hard set rules as to which protocol will give you the best speed. OpenVPN over UDP is a good default to try. If you find yourself having issues, try switching to a different protocol to see if your VPN speed improves.

3) Encryption Level

Stronger encryption is often more complex and can, as a result, slow down a VPN. A 128-bit encryption will in most cases lead to a faster connection than a 256-bit one.

On the downside, lowering encryption strength will make the VPN connection less secure and the transmitted data more vulnerable. So, you can try playing around with the encryption level, but unless you see significant speed improvements with weaker encryption, it is best to stick to the stronger versions.

4) VPN Server Load and Bandwidth

How powerful the VPN server is will have a significant impact on the speed. Overloaded servers with a bandwidth that cannot keep up with the demand will result in a much slower experience.

The client software you use to connect to a VPN service will usually tell you how many IP addresses and how much bandwidth a server has. The higher those numbers, the more powerful the server. Those same clients sometimes even show real-time usage. If the server you’re connected to is overloaded, switching to a different one is usually as simple as a couple of mouse clicks.

5) Your Network Setup

Whether your device is on a wired network and physically connected to a router or using WiFi can affect VPN speed. This distinction is especially relevant if you have a fast connection to the outside world. Because a wired connection is often quicker than WiFi, the latter can be a limiting factor. You can try plugging your computer directly into the router to see if there is a speed improvement.

Ultimately, not all VPN providers are created equal. Even under ideal conditions, the speed and reliability they offer may be drastically different. If you have tried implementing several of the methods mentioned in this article but are still not seeing speed improvements, it may be time to consider switching VPN providers.

Maximize High Speed Internet Potential With These Tips

Most of us are dependent on our connection to the internet. Many use it for social media and news, some of us use it for work, and all of us use it entertainment. Therefore, it’s not only frustrating but can also be debilitating when previously high speed internet starts to falter. These tips will help assure efficient connections during all stages of the process, from set-up to troubleshooting.

1) Do in-depth research on company offers. There are many factors to consider when selecting the best plan, such as supported devices, users, and video streaming needs. An often overlooked concern is the size of a house. Larger houses with lots of walls or other obstructions will require a more powerful high speed internet service.

2) No matter how good the modem is a poor router can ruin everything. Invest in a good router with strong reviews in boosting ability and consistent connections to get the most out of high speed internet.

3) Sometimes the solution is so simple is seems improbable. Loose cables, collected dust, and overheating can all lead to poor connections. All technological equipment should be stored in a controlled, clean environment to keep the connection strong. A Wi-Fi booster can also help extend the range of the router.

4) Secure the network to stop nosy neighbors from hopping on the network and slowing it down. Most companies encourage private passwords when they install the high speed internet, but they can be set up after installation.

5) Clean up the browser, including history, cookies, and old tabs. None of these factors will greatly affect the speed, but the collection of information can build up and slow down the internet gradually.

6) The slowing down process is exacerbated when coupled with a virus or malware. Hopefully, a good antivirus program will make sure this is never a problem. Even then, it’s important to install updates for the antivirus program as they become available, as viruses are constantly adapting too. To be safe, full computer scans with anti-malware programs can pinpoint suspicious programs and help the user remove them.

7) Upgrade the browser and choose the option that best suits current needs. Similar to previous tips, an upgraded and streamlined browser maximizes high speed internet processing. Most computers allow for multiple browsers to be installed, so testing each one with favorite programs and websites is a practical way to go about this. No matter the browser, only use the tools and plug-ins that are necessary, and uninstall ones that are simply taking up space.

8) Shut down the computer regularly. This gives the computer a break from running and will improve the overall functionality of the computer. This downtime allows for updates to install as well.

None of these tips are very expensive or time-consuming. The main issue people face is not doing research before making a choice. Even those who don’t consider themselves technologically advanced can do research and ask professionals for their opinion. Throughout the process, be cautious and only download things that are from trusted companies.